At windows help center some experts suggest the following instructions, you can restore your data. These directions are given for a disk with a combination of 3.5 “IDE. You need a USB to IDE adapters have. You need to contact the manufacturer manual refer to connecting and switching on your equipment if you have any other have drive and adapter. You can follow the instruction to call data from a virus hit back hard, and if you face any difficulty, you can always on 24×7 computer help desk.
Make sure that you powered, you have the power cord. Computer experts to help now that the opening of the affected computer virus tower. Remove the virus affected hard disk, ensure that you have noticed, in minute detail, as you removed because you have put it in the same way.
Now put the right output on the adapter to the HDD/IDE/SATA/PATA socket. The white cord, which is required from the main tower on the hard drive in order to be plugged. This step is vital if you fail to power on the hard drive to create, the good computer can use to read the information. As a result of good computer will not be able to recognize it as a storage medium.
The tech support experts recommend that the power cord to the AC adapter that came from the USB adapter plug. Now it is time to put the power plug into the virus hit computer tower. The other end of the virus hit computer tower power cord is plugged necessary to an electrical outlet, and now you have to turn it on. This will generate electricity, to the white connector on the drive.
Now turn on the good computer that has the recovery software installed. Plug the USB end of the USB adapter to the computer, which installed the good recovery software IDE. The computer recognizes the drive as storage media.
Now run the recovery software and make sure you have correctly selected the files that you are available in the hard disk. Make sure that you have stored all the necessary files to the good computer or a USB device. All files can be used to restore. But tech support team is proposing to save the most important office documents, music files, database and video files.
When the recovery process is complete, you should unplug the USB when it safely remove hardware mode.
Turn now from your computer and you must now cut into the wall socket, the USB to IDE adapter to remove. From the hard drive, remove the white plug. Now install the hard drive that was unreadable. Connect the IDE cable. Make sure that you have connected the white power cord. Put the case into force.
Arrange everything in its place. Turn on the main computer. Now you need to run a restore of the system in its entirety. Insert the USB where you saved all the retrieved data and save it on your PC. Install all required software and get started.